Skip to content

Environmental Testing

Contact us

Environmental Testing

The Environmental testing simulates the different climatic conditions and mechanical stress that products are exposed to during their lifetime. Environmental testing will expose weaknesses in a product’s design or performance that could occur in service, particularly at extreme levels.

Standards applicable for Environmental Testing are:

  • IEC 60068-2-1: Cold Test
  • IEC 60068-2-1: Dry heat
  • IEC 60068-2-14: Change of temperature.
  • IEC 60068-2-30: Damp heat, cyclic
  • IEC 60068-2-78: Damp heat, steady state
  • IEC 60068-2-11: Salt mist
  • IEC 60068-2-52: Salt mist, cyclic
  • JSS 55555: Methods for Electronic and Electrical Equipment.
  • QM 333: Environmental Testing of Telecommunication Equipment
  • MIL 810 Series: Environmental Engineering Considerations & Laboratory Tests
  • Thermal Shock Test

Specification of Chambers used for Environmental Testing are as below:

EquipmentSpecification
Climatic chamber

Test Space Volume: 1540 Litres approx.

Test Space Dimensions: 1100mm (W) x 1475 mm (D) x 950mm (H)

Temperature Range: -40 °C to +180 °C

Humidity Range: 10% to 98% RH

Temperature change rate (as per IEC 60068-3-5): 2.5 °K/min. (Cooling) 3.5 °K/min. (Heating)

Walk-in Chamber

Test   Space   Dimensions: 3000mm (W) x 3000 mm (D) x 3000 mm (H)

Temperature Range: -40 °C to +100 °C

Humidity Range: 20% to 95%RH

Ramp up rate (Average): 5⁰C/min

Ramp down rate (Average): 3⁰C/min

Thermal Shock chamber

Volume: 120 Litre

Temperature range of the hot chamber +50 °C to +220 °C

Temperature range of the cold chamber -80 °C to +70 °C

Cabinet   dimension: 400mm Wide, 600mm Deep, 330mm high

Transportation time: <10 Sec 

We look forward to your enquiry

Product Testing Laboratory for Electronics, Electrical, Machinery & Industrial, Automotive Batteries