Welding Consumables- VdTUV 1153, CE Marking
Welding Consumables
Welding consumables are classified in accordance with basically the mechanical and/or chemical´requirements of the standards, excluding such requirements as size, length, marking and identification manners.
Manufacturing additional materials for welding according to VdTÜV 1153 and DB regulations:
TUV India with the technical support by TUV NORD, Germany has approved various shops in India according to VdTUV 1153 & other DB regulations viz. EN12074, EN13749, EN 14532 etc.
All Certifications of welding consumables are valid for three years subject to annual surveillance audits by TUV INDIA and maintenance of quality systems & testing results by you. Re-certification will be done by TUV NORD Systems GmbH & Co. KG., Germany
Here is some more general information to the specifications on which the approval is based :
- EN 13479 – “ Factory Production Control” for CE marking as per CPD.
- EN 14532-1; Welding Consumables – Test methods and quality requirements.
- The test pieces for the all-weld-metal samples will be in accordance with EN 1597-1 with a thickness of around 20 mm (all sizes given in the EN-standard).
- All butt welds will be prepared on test pieces with around 20 mm thickness and all other dimensions acc. to EN 14532-1 chapter 6.2.2.
- All welding parameters are to be recorded.
- All EN standards referenced in EN 14532-1 are applicable for the approval.
