Lashing point inspections according to DIN EN 12640
With mobile test facilities at the customer's site
For load-securing points on lorries and trailers, minimum requirements and testing are being defined. All load-securing points of a loading area must be designed for approved traction.
| approved overall vehicle mass in t |
approved traction of the loading point in daN (Minimum requirement) |
| 3,5 - 7,5 | 800 daN |
| 7,5 - 12,0 | 1,000 daN |
| 12,0 | 2,000 daN |
- All loading points of an end plate must be designed for an approved traction of 1,000 daN
- A random loading point on the loading area is tested
- The test pressure brought to bear is 1.25 times the approved traction
- The direction of the effect has to be in three directions on the vehicle superstructure
